Fire Resistant Cable " Firecel Sr114h" Cavicel - Italy

Applications

FIRECEL SR 114H are primarily intended for general application.

Typical applications are:

  • BS 5839-1 for standard fire resistant cables in fire detection and fire alarm systems for building
  • BS 5839-8 for voice alarm systems
  • BS 5839-9 for emergency voice communication systems.
  • BS 5266-1 for emergency lighting of premises (PH60)
  • BS 8519 for fire-resistant control cable systems for life safety and fire-fighting application - Category 1
Physical Characteristics
Nr. of conductors x section (sqmm) Size of Cond. (nr./mm) Size of eart wire (nr./mm) Final Diameter (mm) Net weight (kg/km) P clips type
1 mm2 solid SR 114H
2x1.0 1/1.13 1/1.13 7.1 70 AC7
3x1.0 1/1.13 1/1.13 7.6 85 AC8
4x1.0 1/1.13 1/1.13 8.3 110 AC8
7x1.0 1/1.13 1/0.80* 10.0 165 AC11
12x1.0 1/1.13 1/0.80* 12.5 255 AC12
19x1.0 1/1.13 1/0.80* 15.0 380 AC16
1.5 mm2 solid SR 114H
2x1.5 1/1.38 1/1.38 8.0 95 AC8
3x1.5 1/1.38 1/1.38 8.5 115 AC8
4x1.5 1/1.38 1/1.38 9.4 140 AC9
7x1.5 1/1.38 1/0.80* 11.3 225 AC11
12x1.5 1/1.38 1/0.80* 14.5 340 AC14
19x1.5 1/1.38 1/0.80* 17.0 520 AC16
1.5 mm2 stranded SR 114H-R
2x1.5 7/0.53 7/0.53 8.4 100 AC8
3x1.5 7/0.53 7/0.53 8.9 125 AC9
4x1.5 7/0.53 7/0.53 9.8 155 AC11
2.5 mm2 solid SR 114H
2x2.5 1/1.75 1/1.75 9.4 130 AC9
3x2.5 1/1.75 1/1.75 10.0 170 AC11
4x2.5 1/1.75 1/1.75 11.0 210 AC11
2.5 mm2 stranded SR 114H-R
2x2.5 7/0.67 7/0.67 9.9 145 AC11
3x2.5 7/0.67 7/0.67 10.3 180 AC11
4x2.5 7/0.67 7/0.67 11.7 230 AC11
4 mm2 stranded SR 114H-R
2x4 7/0.85 7/0.85 11.5 200 AC11
3x4 7/0.85 7/0.85 12.2 260 AC12
4x4 7/0.85 7/0.85 13.5 330 AC13
 
Colour code up to 4 cores to HD 308 Applicable Standards
2 cores blue - brown Basic design BS 7629-1
3 cores brown - black - grey Fire resistant BS 6387 (cat. C-W-Z)
EN 50200 (class PH30 and PH60)
EN 50200 annex E (fire, mechanical shock and water spray)
4 cores blue - brown - black - grey Flame retardant EN 60332-1-2
7 cores centre: brown Acid gas emission EN 50267-2-1
1st layer: brown - black - 4 cores white Smoke density EN 61034-2
12 cores centre: brown - black - white    
1st layer: brown - black - 7 cores white    
19 cores centre: brown    
1st layer: brown - black - 4 cores white    
2nd layer: brown - black - 10 cores white    
(on request the cores can be one colour only, identified by printed numbers)
Cable construction
Conductors

Plain annealed copper wire, solid class 1 or stranded class 2 according to EN 60228.

Insulation

High performance fire resistant silicone rubber type EI2 to BS EN 50363-1.

Cabling

Insulated cores are cabled together.

Overall screen

Aluminium/polyester tape.

Circuit protective conductor or drain wire

Uninsulated tinned copper conductor of the same section and class as the insulated conductors in the 2-, 3- and 4-core cables. Drain wire of 0.5 mm2 tinned copper conductor is provided in cables with more than 4 conductors.

Outer sheath

LSZH thermoplastic material type LTS3 to BS 7655-6.1. Colour red or white (other colours on request).

* drain wire

NOTE: cables up to 4 cores = Standard Products LPCB Approved.

Click here to download .pdf file